working time

Mon- Sun: 8.00 - 18.00

Free shipping

On order over $599

Money back 100%

Within 30 Days after delivery

Fluke Ti10 Thermal Imager

More Views

Fluke Ti10 Thermal Imager


Availability: In stock


The ultimate tool for troubleshooting and maintenance

This thermal imager is the perfect tool to add to your problem solving arsenal. Built for tough work environments, this high-performance, fully radiometric infrared camera is ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others.

The Fluke Ti10 Thermal Imager comes with IR-Fusion® Technology that integrates infrared and visual (visible light) images in full screen or picture-in-picture views for enhanced problem detection and analysis. IR-Fusion helps users recognize image details and better identify problem areas by quickly scrolling through the different viewing modes.  A full visual image (640 X 480) can be displayed and stored with each IR image.

Fluke IR-Fusion Technology provides five viewing modes - each designed to add greater clarity, accuracy and a valuable frame of reference to infrared images - IR-Fusion allows users to manipulate images right on the camera's display and is designed specifically to allow users to find problems not commonly or easily detected with other tools.

Viewing modes include:
  • Full Infrared - high-resolution standard infrared images.
  • Full Visible Light (this mode available only in the software) - a visual (visible light) image like you would get with a digital camera.
  • Picture-in-Picture - an IR image portal surrounded by a visual (visible light) frame for reference.
  • Auto (Automatic) Blending - combines infrared and visual (visible light) images blended together at user-adjustable levels for the greatest image clarity.
  • IR/Visible Alarm (this mode available only in the software) - displays only the portions of the image that fall above, below or between a user-specified temperature range as IR, leaving the remainder of the image as full visual (visible light).

The IR-Fusion Technology makes it easier to identify details and potential problems by managing and analyzing images with complete control over both the infrared and visual (visible light) spectrums. The ability to fuse images on-camera and optimize images in real-time improves primary target identification, enhances issue locating efficiency and offers a tremendous advantage in reporting clarity.

Thermal and visual images are displayed on the Imager LCD and can be saved to an SD Memory card.  Transferring images to a PC is accomplished by removing the SD memory card and connecting it to a PC through the included card reader. 

  • Inside electrical distribution and service (switch gear, panels, controls, fuses, transformers, receptacles, lighting, conductors, overhead buses, motor control centers)
  • Motors, pumps and mechanical (electric motors and generators, pumps, compressors, evaporators, bearings, couplings, gearboxes, gaskets/seals, belts, rollers, disconnects)
  • Process (tanks and vessels, pipes, valves and traps, reactors, process insulation)
  • HVAC/R (air conditioning, heating, air handlers, refrigeration)
  • Outside electrical distribution for utilities (transformers, bushings, insulators, transmission lines, other exterior conductors, service connections, disconnects, capacitor banks)
What's Included:
  • Thermal imaging camera w/ 20 mm lens.
  • AC power supply/battery charger (including mains adapters)
  • SD memory card
  • SD card reader (USB) for downloading images into your computer
  • SmartView™ software with free software upgrades for life
  • Rugged hard carrying case
  • Soft transport bag
  • Hand strap
  • Users manual
  • Warranty registration card
  • AC Operation
  • Accuracy 5% accuracy
  • Auto Power Off
  • Color Alarm in software only
  • Detector Size 160 x 120 sensor
  • Detector Type uncooled microbolometer, focal plane array
  • Display 3.6” lcd display
  • Emissivity Correction in software only
  • Focus manual, 1-hand focus
  • Fully Radiometric Images
  • Image Frequency 9hz frequency
  • Measurement Mode user defined spots/boxes (software only)
  • Measurement Mode center box (software only)
  • Memory Type 2gb sd memory
  • Number of Temperature Ranges 1 temperature range
  • Palettes 4 color palettes
  • Palettes 4
  • Picture in Picture
  • Reflected Temperature Correction in software only
  • Sleep mode
  • Software
  • Temperature Range °C -20°c to 250°c range
  • Temperature Range °F -4°f to 482°f range
  • Thermal Image
  • Thermal Image Fusion
  • Thermal Sensitivity (NETD) 0.2°c sensitivity
  • Visual Light Image
  • Windows CE-Based Navigation
Accuracy±5°c or 5% whichever is greater
Battery operating time3-4 hours continuous
Battery re-charge time2 hours for full charge
Detector Size160 x 120
Dimensions0.27 x 0.13 x 0.15 m (10.5 in x 5 in x 5 in)
Display3.6 high resolution lcd
Field of View (FOV)23°horizontal x 17°vertical
Image Frequency9
Imager File Formatsbmp, is2
IP Ratingip54
Maximum Images1200 fully radiometric (.is2) ir-fusion images or 3000 basic ir images (.bmp or .jpg)
Memory Typesd memory card (2 gb)
Minimum Focus Distance15 cm (approx. 6 in)
Number of Temperature Ranges1
Operating Temperature-10 to +50°c (14°f to 122°f)
Relative Humidity10% to 90% non-condensing
Software File Formatsbmp, jpg, gif, png, tif, wmf, exif and emf
Spatial Resolution (IFOV)2.5
Spectral Band7.5µm to 14µm
Storage Temperature-20 to +50°c (-4°f to 122°f) without batteries
Temperature Range °C-20°c to 250°c
Temperature Range °F-4°f to 482°f
Thermal Sensitivity (NETD)?0.13°c at 30°c (130 mk)
Warranty2 years
Weight1.2 kg (2.65 lb)

Additional Information

Manufacturer Manufacturer
Send inquiry? N/A

Customer Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

top categories

Test & Measurement

view more

    Total Stations

    view more

      Thermal Imaging

      view more

        GPS System

        view more

          Fluke Ti10 Thermal Imager